+8618581533864
Search
enLanguage
1800W LiFePO4 battery power station 1500W Swiss sockets

1800W LiFePO4 battery power station 1500W Swiss sockets

View Three-stage charger In recent years, so-called three-stage chargers have been widely used in electric vehicles. The first stage is called the constant current stage, the second stage is called the constant voltage stage, and the third stage is called the trickle stage. From the perspective...
Send Inquiry
Product Details of 1800W LiFePO4 battery power station 1500W Swiss sockets

Product Introduction

In the process of unremitting pursuit of transcendence and development, our process technology is continuously optimized and car battery trickle charger factory, 72v lead acid battery charger manufacturers, lithium motorcycle battery charger quality is constantly upgraded. Products are the life of enterprises. The development of enterprises comes from the continuous innovation of products. We have our research and development team to bring out various kinds of products and solutions to meet the customers' requirements, we take each step very carefully to assure our product quality. Incoming material inspection, parts warehousing inspection, product line inspection, and bulk cargo final inspection are all strictly checked.

View

Three-stage charger

In recent years, so-called three-stage chargers have been widely used in electric vehicles. The first stage is called the constant current stage, the second stage is called the constant voltage stage, and the third stage is called the trickle stage. From the perspective of electronic technology, for the battery: the first stage is called the charging current limiting stage, the second stage is called the high constant voltage stage, and the third stage is called the low constant voltage stage. When the second stage and the third stage are switched, the indicator lights on the panel change accordingly. Most chargers have red lights in the first and second stages, and green lights in the third stage. The mutual conversion between the second stage and the third stage is determined by the charging current. If the current is greater than a certain current, it will enter the first and second stages, and if it is smaller than a certain current, it will enter the third stage. This current is called switching current, also known as turning current.

Although the early chargers, including the chargers for famous brand cars, also change the lights, they are actually constant voltage and current limiting chargers, not three-stage chargers. Generally, this type of battery has a stable voltage value of about 44.2V, which is not bad for the battery with high specific gravity sulfuric acid at that time.

Three key parameters about the three-stage charger

The first important parameter is the low constant voltage value in the trickle phase, the second important parameter is the high constant voltage value in the second phase, and the third important parameter is the switching current. These three important parameters are related to the number of batteries, the capacity Ah of the battery, the temperature, and the type of the battery.

Secondly, the high constant voltage value of the second stage is discussed, and the reference voltage is about 44.5V. A high value of this value is conducive to fast charging, but it is easy to cause the battery to lose water, and the current will not come down in the later stage of charging, which will cause the battery to heat and deform. Although this value is not as strict as the first value, it should not be too high.

 

Finally, the conversion current is discussed, and the reference current is about 300 mA. A high value is good for battery life, and it is not easy to heat and deform, but it is not conducive to fast and full charging of the battery; a low value (for laymen) is good for full charging, but due to high-voltage charging for a long time, it is easy to cause the battery to lose water and cause the battery to lose water. Heat deformation. Especially when there is a problem with individual batteries, when the charging current does not drop below the turning current, the good battery will be charged and damaged. The given reference value has a certain range, plus or minus 50 mA or even 100 mA are allowed, but it is not allowed to be less than 200 mA.

0


Specifications&models

Specifications & models

Input Voltage Range

Rated Output Voltage

Max Output voltage

Max Output Current

SMCZ7-2415A/2415C

AC90-264V

24V

33V

15A

SMCZ7-3615A/3615C

AC90-264V

36V

49.5V

15A

SMCZ7-4815A/4812C

AC90-264V

48V

66.0V

15A

SMCZ7-6012A/6010C

AC90-264V

60V

82.5V

12A

SMCZ7-7210A/7207C

AC90-264V

72V

99V

10A

Technical characteristics

Item

Parameters

Ac Input Wide Voltage Range

AC90v-264v

AC Input Frequency Range

40-70HZ

With APFC Function,Power Factor

≥0.98

Soft Switching Technology,Efficiency

≥93%

Charging Mode

Adjustable Dynamic

Protection Level

IP67

Operating Temperature

-40℃~ +60℃

Storage Temperature

-55℃~ +100℃

LED Light Indicator for Charging Process

Standard

Noise

≤45dB

Overall Size

190x140x74.5(mm)

Net Weight

2.0kg

1

Application

2

About Summit Power

3

More models

3


Our mission is to provide customers with excellent products for 1800W LiFePO4 battery power station 1500W Swiss sockets and a series of technical services. We are committed to becoming an excellent corporate citizen loved by our employees, respected by society and praised by the public. We are based on four goals: dedicated colleagues, customer experience, profitable growth and financial performance.

Hot Tags: car battery charger, China, suppliers, manufacturers, factory, wholesale, in stock, lithium car battery charger factory, 80v Forklift Charger, lifepo4 charger factory, 6 6 kw onboard charger in stock, Wholesale 24 volt battery charger, 48v lifepo4 charger factory

[[ProKeywords]]

SPEC DATA

Send Inquiry

Send a Message