
900W 24V 25A Vehicle Lead Acid Battery Charger, Electric Vehicle and Electric Boat ...
Product Introduction
Our product production process adopts automation and seamless connection, and employees do not need to touch the product to prevent human pollution. The packaging is beautiful in appearance, good in exhaust performance, and has a reliable quality control and quality monitoring system, which provides a strong guarantee for the safe and effective production of China ezgo battery charger 48 volt factory, China two wheeler battery charger factory, 48v lifepo4 charger manufacturers. We not only provide customers with high-quality products and talents, but also provide customers with pre-sales, in-sales and after-sales services at any time. Over the years, while pursuing our own development, we actively practice social responsibility and are enthusiastic about social welfare.
Overview of Onboard charger
The on-board charger of a pure electric vehicle or a plug-in hybrid vehicle is a DC charging device whose voltage is the same as that of the battery matched with the original vehicle. According to the control commands of the battery management system, the charging current and voltage parameters are dynamically adjusted to complete the electric charging. The core component of the car charging process. As a power electronic system, the on-board charger is mainly composed of a power circuit and a control circuit. The power circuit is composed of AC rectifier, transformer and power tube, and the DC/DC converter is an important part of it. The control circuit realizes serial communication with the power management, and controls the power drive circuit to output a certain voltage and current according to requirements. Usually for OEMs, the requirements of on-board chargers are low cost, small size, light weight, long life, high reliability and high safety. The current mainstream on-board chargers are generally 3.3kw and 6.6kw.
The basic principle of car charger
Generally there are the following interfaces:
1) AC input: connect the connector coming in from the AC charging socket
2) DC output: the part that the car charger outputs to the battery
3) Low-voltage control interface: low-voltage interface between the on-board charger and the BMS and external connections

Parameters of onboard charger
Item | Parameters |
Ac Input Wide Voltage Range | AC90v-264v |
AC Input Frequency Range | 40-70HZ |
With APFC Function,Power Factor | ≥0.98 |
Soft Switching Technology,Efficiency | ≥93% |
Protection Level | IP67 |
Operating Temperature | -40℃~ +60℃ |
Storage Temperature | -55℃~ +100℃ |
CAN Communication | Optional |
12v3a Auxiliary Power Supply | Optional |
LED Light Indicator for Charging Process | Standard |
Noise | ≤45dB |
Overall Size | 294x210x111(mm) |
Net Weight | 5.9kg |
Specifications of Onboard charger
Specifications&models | Input Voltage Range | Rated Output Voltage | Max Output Voltage | Max Output Current |
SMHC3-4842A | AC90~264V | 48V | 66V | 42A |
SMHC3-6040A | AC90~264V | 60V | 82.5V | 40A |
SMHC3-7240A | AC90~264V | 72V | 99V | 40A |
SMHC3-8440A | AC90~264V | 84V | 116V | 40A |
SMHC3-9632A | AC90~264V | 96V | 132V | 32A |
SMHC3-12025A | AC90~264V | 120V | 165V | 25A |
SMHC3-14423A | AC180~264V | 144V | 198V | 23A |
SMHC3-31210A | AC90~264V | 312V | 440V | 10A |
Application of Onboard charger
As a power electronic system, the on-board charger is mainly composed of a power circuit and a control circuit. For the power circuit, the DC-DC converter composed of the transformer and the power tube is an important part; for the control circuit, its core is the controller, which is used to realize CAN communication with the BMS, collect and analyze the state of the battery. Judgment, and then adjust the charging parameters of the charger and control the power circuit to charge the lithium battery pack according to the three-stage charging curve.

Our Service and Advantages
1. Good knowledge on different market can meet special requirements.
2. Real manufacturer with our own factory located in Dezhou,Shandong China
3. Strong professional technical team ensure to produce the top quality products.
4. Special cost control system ensure to provide the most favorable price.
5. Rich experience on outdoor equipment.

More models

Tel: +86-18581533864
address:No.7 Geruide Road, Decheng District, Dezhou City, Shandong Province, China
whatsapp: 86 18581533864
Our 900W 24V 25A Vehicle Lead Acid Battery Charger, Electric Vehicle and Electric Boat ... have complete testing equipment and fine manufacturing. More thoughtful service, more effective coordination and more effective supervision are the effective ways to apply scientific means in efficiency management and realize the purpose of enterprises. We work together with international excellent suppliers and world-class customer groups to seek common development and win-win cooperation.
Hot Tags: onboard charger, China, suppliers, manufacturers, factory, wholesale, in stock, best motorcycle battery charger factory, 72v 10a battery charger factory, China best lifepo4 battery charger, 48 volt battery charger in stock, China 1 5kw fully sealed charger suppliers, China best onboard battery charger suppliers
[[ProKeywords]]SPEC DATA
Send Inquiry