
900W 60V 12A LiFePO4 Battery Charger for Electric Vehicles Conforming to CE RoHS Factory Wholesale
Product Introduction
Our 48v lifepo4 charger manufacturers, dc fast charger manufacturers, 72v Battery Charger for EVSE are deeply loved by consumers with their exquisite craftsmanship and high-quality product quality. In the long run, our success is not only the growth of our own performance, but also the common growth of employees and the enterprise. Due to our sincerity in dealing with clients, understanding of their needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers′ worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in many countries and regions. With the tenet of 'customer first, good quality, unity and cooperation, seeking truth and being pragmatic', we will go hand in hand with you with considerate service, and welcome new and old customers and people from all walks of life to come to negotiate, visit and guide.
View
Three-stage charger
In recent years, so-called three-stage chargers have been widely used in electric vehicles. The first stage is called the constant current stage, the second stage is called the constant voltage stage, and the third stage is called the trickle stage. From the perspective of electronic technology, for the battery: the first stage is called the charging current limiting stage, the second stage is called the high constant voltage stage, and the third stage is called the low constant voltage stage. When the second stage and the third stage are switched, the indicator lights on the panel change accordingly. Most chargers have red lights in the first and second stages, and green lights in the third stage. The mutual conversion between the second stage and the third stage is determined by the charging current. If the current is greater than a certain current, it will enter the first and second stages, and if it is smaller than a certain current, it will enter the third stage. This current is called switching current, also known as turning current.
Although the early chargers, including the chargers for famous brand cars, also change the lights, they are actually constant voltage and current limiting chargers, not three-stage chargers. Generally, this type of battery has a stable voltage value of about 44.2V, which is not bad for the battery with high specific gravity sulfuric acid at that time.
Three key parameters about the three-stage charger
The first important parameter is the low constant voltage value in the trickle phase, the second important parameter is the high constant voltage value in the second phase, and the third important parameter is the switching current. These three important parameters are related to the number of batteries, the capacity Ah of the battery, the temperature, and the type of the battery.
Secondly, the high constant voltage value of the second stage is discussed, and the reference voltage is about 44.5V. A high value of this value is conducive to fast charging, but it is easy to cause the battery to lose water, and the current will not come down in the later stage of charging, which will cause the battery to heat and deform. Although this value is not as strict as the first value, it should not be too high.
Finally, the conversion current is discussed, and the reference current is about 300 mA. A high value is good for battery life, and it is not easy to heat and deform, but it is not conducive to fast and full charging of the battery; a low value (for laymen) is good for full charging, but due to high-voltage charging for a long time, it is easy to cause the battery to lose water and cause the battery to lose water. Heat deformation. Especially when there is a problem with individual batteries, when the charging current does not drop below the turning current, the good battery will be charged and damaged. The given reference value has a certain range, plus or minus 50 mA or even 100 mA are allowed, but it is not allowed to be less than 200 mA. | ![]() |
Specifications&models
Specifications & models | Input Voltage Range | Rated Output Voltage | Max Output voltage | Max Output Current |
SMCZ7-2415A/2415C | AC90-264V | 24V | 33V | 15A |
SMCZ7-3615A/3615C | AC90-264V | 36V | 49.5V | 15A |
SMCZ7-4815A/4812C | AC90-264V | 48V | 66.0V | 15A |
SMCZ7-6012A/6010C | AC90-264V | 60V | 82.5V | 12A |
SMCZ7-7210A/7207C | AC90-264V | 72V | 99V | 10A |
Technical characteristics
Item | Parameters |
Ac Input Wide Voltage Range | AC90v-264v |
AC Input Frequency Range | 40-70HZ |
With APFC Function,Power Factor | ≥0.98 |
Soft Switching Technology,Efficiency | ≥93% |
Charging Mode | Adjustable Dynamic |
Protection Level | IP67 |
Operating Temperature | -40℃~ +60℃ |
Storage Temperature | -55℃~ +100℃ |
LED Light Indicator for Charging Process | Standard |
Noise | ≤45dB |
Overall Size | 190x140x74.5(mm) |
Net Weight | 2.0kg |
Application
About Summit Power
More models
Our 900W 60V 12A LiFePO4 Battery Charger for Electric Vehicles Conforming to CE RoHS Factory Wholesale have a strong price performance, competitive advantage and continuous stability of product quality. Therefore, it is your wise choice to choose our products. We hope that our employees will pursue the continuous optimization of work style and efficiency in the process of work, and continuously improve the work level. We understand that if we want to survive and develop, we must use all opportunities to reduce costs, improve efficiency, expand the market, improve service quality, and strengthen our core competitive advantages.
Hot Tags: car battery charger, China, suppliers, manufacturers, factory, wholesale, in stock, 12 volt battery charger suppliers, China 3 3kw fully sealed charger suppliers, China e rickshaw charger 48 volt price factory, China 72v lithium ion battery charger suppliers, motorbike battery charger suppliers, 48v 150a Lfp Charger
[[ProKeywords]]SPEC DATA
Send Inquiry



