What Are the Features of a 2KW Battery Charger?

When purchasing a 2KW Lithium(LFP/NMC/LTO...) or Lead Acid (Sealed/Flooded) battery charger, there are a number of features to look for. These features include the ability to adjust the output current, multi-stage charging profiles, and communication protocol. Another feature to look for is the safety factor. A high safety factor is important for a charger that is used in an electric vehicle.

Summit Charger series prevent overload of a limited AC source

Summit Charger prevents overload of a limited source of AC power by supplementing the AC source with battery power. The multiplus feature also compensates for insufficient AC power sources. When the AC source goes down, battery power will automatically be charged to provide power for the unit. With battery power assistance, even small generators can run a single air conditioner. Summit Charger feature is configurable for your battery and your BMS, so you can get the most out of it.

Summit Charger prevents overload by regulating the charging process of battery cells. This prevents overcharging of the batteries and maximizes power output from limited AC source. Summit Charger features adaptive charging and is compatible with multiple power sources.

Summit Charger protects battery pack from over-charged and over-discharged

An overcharge protection feature is important to avoid damaging your lithium ion batteries. An overcharged cell can cause internal pressure to rise. This protection function will automatically stop charging and suspend discharge to avoid damaging your batteries. It also prevents over-discharge by suspending discharge during standby mode and low quiescent current.

In addition to protecting the battery from over-discharged and over-charged situations, a BMS also balances the cells in a battery pack to maintain the same state of charge. This is important for battery health and extends battery life. The BMS will balance the batteries when it detects that one cell has a higher state of charge than another, and it will send the appropriate charge current or discharge current to the other cells.

While a BMS over-discharge protection feature does not guarantee against battery fires, it is an important safety feature. If you accidentally connect the terminals of a lithium battery, the BMS will prevent the battery from overheating and catching fire. In addition to the over-discharge protection feature, a BMS may also have a short circuit protection feature. In the event of a short circuit, a large current flow will occur in a battery, which can cause it to overheat and catch fire.

Summit Charger SMCZ2 Series Input Voltage AC 90V-264V; Rated Output Voltage DC 24V~96V

Summit Charger SMCZ2 Series' Input voltage range is AC 90V to 264V, which is the same as the input voltage of most electric vehivles. This wide range allows for the converter to operate anywhere in the world and meet the regulatory requirements. Moreover, it is highly efficient, delivering up to 93% conversion efficiency.

Automatically shuts down output if AC source is overloaded

An AC source overload can cause the converter to shut down. The charger operates in LDO mode for 32 milliseconds before it recognizes the overcurrent condition and shuts down. Once the AC voltage drops below a threshold, it reverts to normal operation.

Short circuit protection

A short circuit is a condition in which an electrical circuit does not work properly. It could result in fire or smoke. It could also cause damage to a battery. Short circuit protection in battery chargers is an important safety feature. The charger will shut down automatically when it detects a low or high input voltage. It will resume working when the voltage is back to normal.

Summit Charger is used in electric vehicles

Summit Charger is a high-performance battery charger designed specifically for electric vehicles. Its features include high efficiency, compact size, long life, and reliable security. The charger also has full protection functions, including overheat protection and a built-in thermal induction device. Its fully sealed potting process ensures that the charger is fully protected from moisture, dust, and other external factors.

Summit Charger is a direct current charger that transfers power via a conductor. It is efficient and simple, and has two methods of operation. The on-board Summit Charger is typically used for slow charging, while the off-board charger is typically placed at a fixed location. 

In addition, they can be equipped with Enable Control and CAN communication interfaces to enable real-time communication with the BMS.

Features of a 24V 36V 48V 60V 72V 80V 96V 2KW On Board Battery Charger

An efficient charger can help maintain the condition of your batteries. When selecting a battery charger, the input and output voltage should be considered. Some types of batteries require lower voltages than others. To ensure that your battery is protected against damage, you should look for a charger that offers short-circuit protection.

Datasheet of Summit Charger SMCZ2 Series

Summit Charger series

Hot Tags: 36v 48v 60v 72v 2kw on board battery charger, China, suppliers, manufacturers, factory, wholesale, in stock,