The Whole Product Series Introduction of Summit Charger
These 7 battery charger models are designed to charge Wet/Flood, AGM, Gel, Deep Cycle Lead Acid, LiFePO4 and Lithium Ion batteries.
Featuring the best feature set delivered in a smart firmware built in, with input wide voltage, high power factor, high reliability, fully-sealed pouring process, high safety, and dynamic charging curve.
Summit Chargers are a whole product series that offer High Efficiency, High Reliability and Multi-Voltage Support with automatic DC output voltage detection and adjustment. Designed for on-board or off-board charging, Summit Charger Series enclosure is IP66/IP67 rated to resist water dust and other environmental elements.
Another advantage of Summit Charger is that it features soft-start, which allows to lower its peak current and prevents overshoot during start-up or recovery from a fault condition. This feature improves work efficiency by minimizing the switch peak current and reducing the inrush current, which improves circuit performance and reduces the power dissipation of the module.
In addition, Summit Charger has an automatic DC output voltage detection and adjustment that helps to ensure an accurate and consistent charge of the output capacitors. This is essential for ensuring the life of your battery pack.
In addition, Summit Charger has an automatic DC output voltage detection and adjustment that helps to ensure an accurate and consistent charge of the output capacitors. This is essential for ensuring the life of your battery pack.
Featuring industry leading charge algorithms, these chargers prevent both under and overcharging, optimizing both daily battery capacity and overall battery life. Air-cooling fan and high energy efficiency help extend battery life.
Summit Chargers are available in multiple configurations to accommodate a wide variety of battery types, including wet/flooded, AGM, gel, deep-cycle lead acid, lithium-ion, and other common batteries. Additional options include current limit, short circuit, reverse polarity, undervoltage, overvoltage and wrong battery voltage protection.
Fortunately, Summit Charger has put together a whole product series to make this feat of charging a breeze. Summit Charger also has a high frequency mode that uses advanced algorithms to optimize individual charge cycles, increasing battery longevity and saving money in the long run. Finally, Summit Charger boasts impressive charging technologies that are compliant with newest energy efficiency standards.
INPUT WIDE VOLTAGE
Summit Charger is an ideal solution for wide input voltage applications from Li-Ion powered systems to automotive, industrial and telecommunications power supplies. It accepts a wide range of input voltages from 60V to 294V, suitable for any voltage level in any region of the world, and features high-performance frequency.
HIGH POWER FACTOR
Summit Charger series designed and manufactured with high performance in mind, Summit Charger line offers impressive features available on a battery charger today. AC input with Active Power Factor Correction (APFC) which has low-heat output and no pollution to electric network.
HIGH RELIABILITY
Summit Charger has wide temperature range: - 40 -+60 °C, 100% full load aging test, soft switching technology; low switching loss of power devices; to achieve high efficiency (>93%) , energy saving and power saving.
FULLY-SEALED POURING PROCESS
Fully-sealed and heat-conducting silica gel process ensures protection level IP67, good seismic resistance, good heat dissipation performance and long service life.
HIGH SAFETY
Waterproof, shockproof, acid fog proof, dust proof and enhanced isolation design make it run safely in any environment.
DYNAMIC CHARGING CURVE
Charger with computer interface, can adjust charging mode on site. Suitable for lead-acid, lithium batteries and other batteries to achieve the best matching. Equipped with CAN communication interface to realize real-time communication with BMS.
TEMPERATURE COMPENSATION
Intelligent temperature compensation in the charging process can avoid damage caused by overcharging or undercharging, and maximize the battery life.
SMCZ1E-1.5kW / RE1500
SMCZ2E-2kW / RE2000
SMCZ7-800W
SMHC3-3.3kW
Summit Charger has got as many applications as you can barely imagine, as long as your devices are powered by batteries of similar operating power. For exemple, 800W or 1.4kW are particularly suitable for E-bikes & E-scooters, 1.5kW has many applications as Golf Carts, E-rickshaws, Surfboards, and Low-speed vehicles etc, while 2kW can be used for Motorcycles, Marines and ATVs which need bigger charging current. 3.3kW is an ideal solution for recharging the power batteries of electric vehicles such as hybrid and pure-electric cars, buses and logistics vehicles. The charger features a CAN-bus interface for real-time communication with the vehicle’s battery management system (BMS). It can adjust charging current or voltage parameters, perform corresponding actions and complete the charging process safely and efficiently.
Are you looking for an easy and efficient way to charge your batteries?
Look no further than Summit Charger! Our battery chargers are perfect for keeping your batteries charged and ready to go.
