Name: 24V 48V Electric Boat Charger
Brand: Summit Charger
SKU: 223505486

24V 48V Electric Boat Chargers

Power your electric boat with these 24v 48v battery chargers. They support multi-chemistry and voltages so you can charge everything from lithium batteries for trolling motors to lead-acid batteries for running lights, bilge pumps and other house loads.

These marine grade smart batteries offer four times more energy than traditional lead acid batteries of the same size, thousands of charging cycles and long life.

When it comes to buying a charger for your boat, camper or RV you need to make sure that the battery charger is waterproof. That way you can rest assured that your investment is protected. The best way to do this is to look for a battery charger that has a waterproof rating of IP67. This will give you peace of mind knowing that your battery charger is safe to use in all weather conditions.

Waterproof IP67

The IP rating system is usually followed by two numbers; the first number offers a scale of 0-6 and is used to determine how well the device can resist solids like dirt, sand and dust, and the second is an indication of how well the product can stand up to liquids such as water and moisture. Depending on the size of the enclosure that is used for your product, there are different levels of IP protection available. For example IP66 is suitable for equipment that will come into contact with pressurised water whereas IP67 can cope with up to one meter of freshwater immersion. The benefit of IP67 is that you can be confident that your battery charger will be able to withstand all sorts of weather conditions, from heavy rain and even jets of water. That way you can be safe in the knowledge that your battery charger will not be damaged when using it outdoors or when camping. A battery charger with an IP67 rating will offer you complete protection from any debris or dust that may be encountered, and it will also be able to withstand up to 1 meter of freshwater immersion. That means you can be confident that your marine battery charger will be able to protect your batteries from any exposure to the elements, and it will remain fully functional even when you are outdoors or camping.

24V 48V Electric Boat Chargers

SMCZ1P-1.5kW(Silver)

SMCZ2-2kW

SMCZ1P-1.5kW(Black)

Fast Input Charger

This waterproof charger has a 1.5 kW/2kW capacity for your large 48v boat battery pack. It can be used both on and off the boat, in all weather conditions. Its cooling fan and fully sealed aluminum alloy materials prevent water short circuiting and overheating.

Besides charging your main propulsion battery, this unit has an additional output that provides auxiliary power supply to charge the lithium, AGM or lead-acid batteries that power running lights, bilge pumps and other "house" loads. This helps extend the lifespan of these batteries by reducing the number of cycles they are subjected to.

Its dual stage charge mode optimizes the balance of your batteries by delivering a high current to the deepest-discharged cells first. This helps the remaining cells catch up to the charged ones, ensuring a balanced and fully-charged battery.

In addition to its fast input, this unit offers a high efficiency of 93%. That means that it will use less energy than traditional chargers to achieve the same results. This will save you money on your electricity bills and reduce the amount of waste generated by your charger.

Aside from its low weight, this charger is also durable and can withstand vibration. It can be mounted in a dry area and is ideal for boating, camping or any other outdoor activities. Its IP67 rating makes it resistant to dust, dirt and other contaminants. Its die cast aluminum enclosure is corrosion-resistant and comes in silver and black to match your boat's design.

It is important to note that it is dangerous to attempt to recharge a battery with a higher voltage than its rated one. It is possible to burn out the battery or cause it to explode, and it can also harm people or property.

Summit Charger

This charger is fully automatic and supports a wide range of battery chemistries. It features an indicator that shows the status of each battery by color: red, yellow and green. The unit is designed to protect against short circuit, over-voltage, over-temperature and reverse polarity.

These chargers maintain constant output watts while adapting to 240-volt or 120-volt shoreside input power. They can be used in a variety of applications, including trolling motors powered by 24V lithium or AGM batteries and 12-volt lead-acid batteries that power a live bait well or other electronics on a boat.

They are equipped with a microprocessor to monitor and control the battery charging process. This feature helps to prevent overcharging or over-discharging the battery and extends its life. The chargers are also safe to use as they have a high level of insulation and can be safely plugged into common household electrical receptacles without tripping the attached circuit breakers.

They have a low ripple and noise level, which is important for sensitive electronic devices onboard a yacht. They are also waterproof and built to withstand harsh environments on the open sea or in a marina.

Multi-Charger

A multi-charger is an adapter that can adjust the voltage of the charger to match the battery it is charging. This is particularly useful for travelers who use electronics that operate on different voltage standards. Attempting to charge these devices with a charger that is not compatible with their voltage can result in an insufficient charge or even burn the device out by pouring too much energy into it.

For instance, a 24-volt battery charger will not work with 48-volt batteries because they operate on different voltage levels. This is why it’s important to buy a charger that can charge batteries of the same voltage level. This way, you’ll be able to charge all of your battery banks simultaneously without having to wait for each one to finish charging.

A good battery charger will also have ports that are individually microprocessor controlled. These ports are capable of charging various types of batteries, including lithium and lead-acid. They also have built-in balancing capability that eliminates the need for a separate battery balancer. These features will make your battery charging experience a breeze.

Additionally, some battery chargers feature a number of safety features. These include short circuit, overvoltage, and reverse polarity protections. In addition, some have a high-temperature cut-off function that prevents overheating.

The multi-connectable fast charger from Icom is a good example of this type of battery charger. The charger’s pods can be connected together in a daisy chain using pin connectors on each of them. This provides a flexible and convenient way to charge multiple radios at the same time.

AC Input Wide Voltage Range：	AC90-264V
AC Input Frequency Range：	40-70HZ
With APFC function, Power Factor：	≥0.98
Efficiency：	≥93%
IP Level：	66/67
Working Temperature：	-20 ℃ ~ + 85 ℃
Storage Temperature：	- 55 ℃ ~ + 100 ℃
CAN Communication：	Optional
Auxiliary Power Supply 12V3A：	Optional
LED Light Indicator：	YES
Noise：	≤45dB

Models	Input Voltage Range	Rated Output Voltage	Max Output Voltage	Max Output Current
SMCZ2-2440A/2440C	AC90-264V	24V	30V	40A
SMCZ2-4835A/4825C	AC90-264V	48V	60V	35A/25A
SMCZ1P-2430A/2430C	AC90-264V	24V	30V	30A
SMCZ1P-4825A/4820C	AC90-264V	48V	60V	2A/20A